Microsoft
Software
Hardware
Network
Question : Problem: Restored bios settings now I have no video
Hello all,
I've got a system here which I know very little about its contents, but which had a problem where on startup it said the CPU or memory frequency was wrong in setup. According to advice I found on the internet I went into setup and restored the original BIOS settings. I know the motherboard is a NVIDIA nForce 650i
However, upon restart the monitor display now shows nothing at all, and there is no on-board video to connect the monitor to. I've tried reseating the video card (that's a Leadtek PX8800 GT ZL) and the 2 sticks of OCZ DDR2 PC2-6400 (800mhz) RAM but to no avail.
All replies appreciated!
Answer : Problem: Restored bios settings now I have no video
tume for the old card, seems a dying card to me..
Random Solutions
Problem: Precision 650 memory problem
Problem: Join a Ipaq to active directory domain?
Problem: Cisco VPN Client Automatic Reconnection
Problem: 2924 switch login problems
Problem: can I upgrade onboard flash memory from 64MB?
Problem: CELL_SERVER
Problem: Putty Plink command line issue unsupported
Problem: PRINTER TRAY SETTINGS
Problem: Disk Boot Failure
Problem: Using network cable and wireless together