Microsoft
Software
Hardware
Network
Question : Problem: Secure CRT not connecting to SSH device while Putty does
Hello, I have setup SSHv2 on my Cisco 2811 rtr and I am trying to use secure CRT to access it, however I cannot. I guess I don't know the proper settings or something. I used Putty on the same machine and it worked fine. I even used wireshark during my secure CRT session and it showed that the SYN packet and the ACK packets were successfully transmitted. It shows that I am connected when I check that I want to use the firewall to connect, but when I don't (because I don't) it doesn't show that I am connected. When it does show that I am connected there is nothing on the screen.
The rtr is on the other side of the FW and I used to telnet to it with Secure CRT without any issues.
I can also connect to all of my other SSHv2 clients without any issues. It is just my external router that I am having problems with.
Any help would be appreciated.
Thanks in advance.
Answer : Problem: Secure CRT not connecting to SSH device while Putty does
Can you connect to the cisco 2811 using putty and see the logs? What re them reporting?
Enable debugs for ssh "debug ip ssh"
Can you paste the logs here?
Random Solutions
Problem: Overclocking
Problem: installed more ram and system is not recognizing it
Problem: Change Word Default ADF image size to 8.5"x11"
Problem: Calculating space for backup to LTO-2 using EMC Retrospect
Problem: Email sync between outlook 2000 and treo 650 - no email accounts found
Problem: acoustic mode in the bios of s5000vsa
Problem: ATA and SATA2
Problem: HP Separator Pages
Problem: Bootup Message: "Refresh rate lower than recommended. Press "exit" to proceed."
Problem: Receiving files via bluetooth