Microsoft
Software
Hardware
Network
Question : Problem: CUSL2-C freezes upon boot with AGP card
I have asus CUSL2-c (bios rev. 1009) with a P3(1GHz) 512MB RAM, my onboard IDE controller crashes upon boot, noted by not able to go to screen after the POST screen (it still lists the onboard IDE devices, but freezes after) unless I skip all the onboard IDE devices. I can still boot from floppy and flash bios). This only happens with a AGP cards (for some odd reasons if I use PCI video card it works perfectly fine). I need to know how to troubleshoot this
The AGP video cards I have tried (all of them works in other computers):
ATI Rage 128
ATI All-in-wonder Radeon 8500 DV
ATI All-in-wonder Radeon 9800 Pro
ATI All-in-wonder Radeon X800
BFG GeForce 7600GS AGP
Answer : Problem: CUSL2-C freezes upon boot with AGP card
coral47
http:/Q_24120459.html#a235
79741
>>- work around it as best as you can.
>>- toss the motherboard, as it is probably on it's way out.
PCBONEZ
http:/Q_24120459.html#a237
09284
>> Asus CUxxx Series motherboards were plagued with bad capacitors.
Random Solutions
Problem: acoustic mode in the bios of s5000vsa
Problem: Installed aftermarket motherboard on HP and now have no sound
Problem: removing a cpu from a Sun X4240 sunfire
Problem: Bootup Message: "Refresh rate lower than recommended. Press "exit" to proceed."
Problem: How do I get the correct sound driver?
Problem: Two Deskstar drives fail on first use with Promise Ultra100 TX2 controller card
Problem: NSS
Problem: Trying to find out how to determine a backup tape's GUID or name...
Problem: Abit NF7-S motherboard not recognizing processor????
Problem: HTC Tilt (8925) - Sound Quits Working