Question : Problem: New Cisco GIG Switch and PIX VPN -- LAN Access Problems

Hello,

I had VPN on a PIX 515E set up and running for remote access to our office network.  It worked great for two years until we did a couple of things recently.  We upgraded our phone system to VIOP(Cisco) and also our switch to a GIG switch(also Cisco).  The vendor that set up our VOIP also installed our GIG switch.  We now have two "main" switches -- one powered switch for the VOIP phones and the new GIG switch.  The PIX and rest of the network used to connect to an old Cat 2900 and now everything connects to this new GIG switch.

Now, using the Cisco VPN Client as always, I am able to connect and get into the network, but I can't ping and see any computers/servers on our network like I used to.  Does anyone have any ideas why??  Is it because of the new switches and some new VLAN configs the vendor may have done??  Everything inside the office works great.  I have yet to see the switches configurations but I am hoping that is the issue.

Any insight/help is appreciated!

Thanks.

Answer : Problem: New Cisco GIG Switch and PIX VPN -- LAN Access Problems

You should have a nat 0 statement that I don't see in any of your configs...

nat (inside) 0 access-list 101