Question : Problem: VPN Tunnel is connected, but traffic ignores it...

I have 2 cisco PIX 501's, one wiht static IP the other dynamic.

VPN Server is on the static end, but it is at the remote site... called Red. I can get to the internet, but it I try to ping

10.10.10.1  ---- Cisco PIX 501 --- Dynamic IP  <------------->50.50.50.50 (Static IP) ---- Cisco PIX 501 ------ 10.10.20.1

The VPN Tunnle light is lit... but I cannot ping or reach any of the 10.10.10.0 addresses (behind blue) where the W2K3 Server (10.10.10.10) is and it is the Domain Controller / DNS. I think there is probably an issue with the Split tunnel.. but do not really know. I do see one error in the "vpngroup unityclient dns-server 10.10.10.10 192.168.1.1". The 192.168 address is left over from testing and should be 151.198.0.39, but I do not think that will fix it.

Here is the setup for Red PIX

: Written by enable_15 at 21:33:04.327 UTC Wed Jan 25 2006
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password  encrypted
passwd  encrypted
hostname Red
domain-name domain.local
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list 100 permit ip 10.10.20.0 255.255.255.0 10.10.10.0 255.255.255.0
access-list 100 permit ip 10.10.20.0 255.255.255.0 10.10.30.0 255.255.255.0
access-list 200 permit ip 10.10.20.0 255.255.255.0 10.10.10.0 255.255.255.0
pager lines 24
logging on
icmp permit any echo outside
icmp permit any echo inside
mtu outside 1500
mtu inside 1500
ip address outside 50.50.50.50 255.255.255.0
ip address inside 10.10.20.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool clientpool 10.10.30.1-10.10.30.10
pdm location 10.10.10.0 255.255.255.0 outside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list 200
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
conduit permit icmp any any
route outside 0.0.0.0 0.0.0.0 50.50.50.50 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
ntp server 128.59.59.177 source outside
ntp server 66.250.131.180 source outside
http server enable
http 10.10.20.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set myset esp-des esp-md5-hmac
crypto dynamic-map cisco 1 set transform-set myset
crypto map dyn-map 20 ipsec-isakmp dynamic cisco
crypto map dyn-map interface outside
isakmp enable outside
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption aes
isakmp policy 10 hash md5
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
vpngroup unityclient address-pool clientpool
vpngroup unityclient dns-server 10.10.10.10 192.168.1.1
vpngroup unityclient default-domain domain.local
vpngroup unityclient split-tunnel 200
vpngroup unityclient idle-time 1800
vpngroup unityclient password ********
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 10.10.20.101-10.10.20.130 inside
dhcpd dns 10.10.10.10 151.198.0.39
dhcpd lease 1048575
dhcpd ping_timeout 750
dhcpd enable inside
terminal width 80


Setup for Blue is:


PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password  encrypted
passwd encrypted
hostname blue
domain-name domain.local
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list outside_in permit tcp any interface outside eq 3389
pager lines 24
icmp permit any echo outside
icmp permit any echo inside
mtu outside 1500
mtu inside 1500
ip address outside dhcp setroute
ip address inside 10.10.10.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm location 10.10.10.10 255.255.255.255 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp interface 3389 10.10.10.10 3389 netmask 255.255.255.
255 0 0
access-group outside_in in interface outside
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
ntp server 128.59.59.177 source outside
ntp server 66.250.131.180 source outside
http server enable
http 10.10.10.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
sysopt noproxyarp inside
crypto ipsec transform-set myset esp-des esp-md5-hmac
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd dns 10.10.10.10
vpnclient server 50.50.50.50
vpnclient mode network-extension-mode
vpnclient vpngroup unityclient password ********
vpnclient enable
terminal width 80

Answer : Problem: VPN Tunnel is connected, but traffic ignores it...

Yes, having the spllittunnel refer to a non existing access-list is no good.  While 100 is a bit unspecific for my likings (and I don't like reusing the same acl for several purposes), I believe it would work to use that.
Random Solutions  
 
programming4us programming4us