Question : Problem: VPN Pix to Router ADSL

Hello, I have a problem.  
I have a "PIX 506E" with IP estatic and a 837 Cisco ADSL with IP estatic, I must connect them by VPN.  For a video system conference, I need to arm a tunnel to connect these two sites.  
It is not necessary that it has security because is single for video.  
Since I can do it?  
Thank you very much by the aid

Answer : Problem: VPN Pix to Router ADSL

Yes - not difficult to setup.  Basically you create isakmp policies for phase 1, crypto maps for phase 2 and access-lists that specify what traffic should traverse the tunnel.  Here is a good URL from Cisco on how to do this with a PIX and router.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094498.shtml

One important note is that to create an IPSec tunnel between the router and PIX, the router must have an IOS that supports IPSec.
hope this helps