Question : Problem: Windows xp installation raid problem

Am trying to install windows in raid 0 but the setup doesnt recognize the raid. i have enabled raid from the bios and created the raid array succesfuly with 2 identical 500gb sata wd caviarse16 hard disks. I press f6 when am asked in the winxp setup process and i put the floppy disk of the raid driver which was from the  motherboard's cd.. the setup then reads the driver but when i get in the create partition etc section the raid is not found.. neither the 2 hard drivers separately. My only guess is of a faulty driver.. can you lead me to an updated driver or another solution so my raid gets recognized?..
My motherboard is asus m2n32 sli deluxe and i use 2 western digital caviar se16 in stripping raid.
The floppy drive i use is an external usb one, does that have to do with anything.

Chris.

Answer : Problem: Windows xp installation raid problem

after you press F6 your asked to specify the driver in installation....press S select first driver load it from floppy and press again S for each driver specified for win version....choose them even if the setup tell you the drivers already exist