Microsoft
Software
Hardware
Network
Question : Problem: How to use One Task sequenceon different computer hw?
Hello
I have one task sequence that deploys Xp SP3 to one Laptop type. I have created a driver package for that modell and applied it to the task sequence. I have defined the right Mass storage drivers to use in the Apply driver package. When I run the task,the klients buids up and everything works fine.
But what do when I have another Laptop with different hardware drivers.?Do I have to create another task sequence and add the Driver package for that Laptop like I did for the other one?
Since I have to set the Mass storage Driver (Model) in the Apply driver package, this limits me to use different models. with different controllers..
Is there another way to do this?
Add storage drivers for both to the boot Image?
thx for all help!!!
Answer : Problem: How to use One Task sequenceon different computer hw?
You find an excellent blog post about OS Deployment and driver management here;
http://blogs.technet.com/d
eploymentg
uys/archiv
e/2008/02/
15/
driver-
management
-part-1-co
nfiguratio
n-manager.
aspx
Random Solutions
Problem: Need help with the "Route -p" command for dual homed servers
Problem: Motherboard Grounding to case
Problem: RicohRICOH Aficio 1045 PCL 6 - Not able to print hole punches
Problem: Security Appliance (Firewall/VPN) Recommendations for a SMB
Problem: 6 monitor setup
Problem: What are Recommended Hard Drive Data Recovery Techniques and Services?
Problem: how to fix noisy computer fan
Problem: How to tell which device wireless adapter connected to: Access Point or Router
Problem: How do I change the timeout settings for the RemoteApp user session in Terminal Services 2008
Problem: Boot problems