Microsoft
Software
Hardware
Network
Question : Problem: Ghost 2003 created partition and hang up problems
While trying to "Clone" one drive to another through Ghost (it's Windows application), the drive and system froze up and will not boot into Windows through the options provided. When doing a cold boot, PC DOS comes up, with options that will not run (i.e. return to Windows does not work). Ullimate Boot Disc indicates that the volumes are as follows:
B:\300.50 MB NTFS
C:\7.8MB FAT
E:\74.53 GB NTFS
and E: is now where my Windows installation sits.
Through Recovery Consule (fixboot, fix mbr or diskpart /delete ...), modifying boot.ini or other ? ideas, how to I back out of this without destroying the Windows installation which did work and boot fine before I tried to image the drive?
Answer : Problem: Ghost 2003 created partition and hang up problems
I needed an answer at Experts Exchange within your average response time.
+/- 8 hrs could be good.
After 24+ hours no response. Had to take control and fix it myself.
chuck53
go figure and do not continue to send emails that this is still open.
Random Solutions
Problem: Dell Sata Controller does not show Sata drives in Windows
Problem: moving profiles between terminal servers 2003
Problem: SMS Query for MS products against a selection of client PC's
Problem: Bonded T1 Access for Cisco 7206
Problem: USB Ports Not Working
Problem: VLAN Tunnel
Problem: MEMORY TYPE PROBLEM
Problem: What are Repeaters ? and How they are better in repeating signals than Switches
Problem: TS Web Access 2008 - Only 2 users can connect and launch apps
Problem: Is there anything else I can try to get this drive to boot or access the data?