Question : Problem: cannot boot - raid controller doesn't see hard drives - scsi

Server has 2 scsi hd's using Raid 1

Problem started with another post regarding plugging in usb device would crash system. Another tech advised getting an add-on usb 2.0 adapter, which I did, but it still crashed the system. I then pulled out the card, but when I reboot it cannot find my hard drives.  Message is that Server Raid  slot 3 not responding properly Error code B114. I can get into the mini raid controller but don't know what settings to change. Configuration reads as follows:
unattended=off
readahead=on
clustered=off
bbc=no
boot blk 5.10.21
rebuild=high
defunct drives=0
offline drives=0
critical drive=0
bad stripe drives=none
locked stripe drives=none
blocked drives=none

under the config page
logical drives = 1
size = 70006
raid = 1
state = okay
stripe size = 8kb
write policy = thru
readahead = on

I saw an option to copy settings from drives... should I try that? or is there something else?

Answer : Problem: cannot boot - raid controller doesn't see hard drives - scsi

Have found the solution on my own. Reseating the RAID controller into another PCI slot did the trick.