Microsoft
Software
Hardware
Network
Question : Problem: Amanda backup failing at client on sendbackup service
fresh install of amanda on CentOS 5.2 server. 2 clients are CentOS 5.2 also, but only trying to backup a folder ('/myfiles') on one to establish that it works before deployment. Amcheck is successful. (See actual output of amcheck at end).
I keep seeing "dumper1: FAILED 01-00002 "service /usr/libexec/amanda/sendba
ckup failed: pid 24892 exited with code 1" in the various logs. I'll attach some of them.
I'm new to amanda, so you'll probably need me to send more info. This issue is high importance with lots of point. Thanks.
::::::::::::::::::::::::::
::::::::::
::::::::::
::::::::::
::::::::::
::::::::::
::::::::::
::::::::::
:::
-sh-3.2$ amcheck dailyset1
Amanda Tape Server Host Check
--------------------------
---
Holding disk /dumps/amanda: 273876 MB disk space available, using 272876 MB
slot 1:read label `dailyset1-1', date `X'.
NOTE: skipping tape-writable test
Tape dailyset1-1 label ok
Server check took 0.155 seconds
Amanda Backup Client Hosts Check
--------------------------
------
Client check: 2 hosts checked in 0.191 seconds. 0 problems found.
::::::::::::::::::::::::::
::::::::::
::::::::::
::::::::::
::::::::::
::::::::::
::::::::::
::::::::::
::::::::::
::::::::::
::::::::::
::::::::::
::
Answer : Problem: Amanda backup failing at client on sendbackup service
It may be read permission issue. Does the amanda backup user have read access on /myfiles directory?
Random Solutions
Problem: my printer is printing everything at one quarter size: HP 6310 OfficeJet all-in-one printer
Problem: How bad are E-machines?
Problem: PC not booting due to unplugging of NIC
Problem: mmx emulator ...
Problem: VIA Audio Driver
Problem: No HP devices have been detected. HP Solution Center will close now. L7650 working otherwise
Problem: DLT tape gives only half blocks back of what was written.
Problem: Flexible (and Cheap) VNC "Help Desk"
Problem: Does this Samsung Plasma have Video and audio out, for screen capture. If not is capture possible over an HDMI "input"?
Problem: Long delay when connecting to server via ssh