Question : Problem: Making a 1G996 cable

Well, my Dell PowerEdge 1500SC server is shutting off randomly, and I'm thinking it's a bad power supply.  It had the non-redundant power supply in it (Dell Part 6G147).  However, these don't seem to exist anymore.  So I'm installing the redundant power supply system (Parts 4G856 (x 2), 2F776, 0M495 and 4G609.  I have everything - except part of 4G609.  4G609 is a set of 4 cables.  I have 3 of the 4 cables.  The missing cable, part 1G996, has a standard 20-pin PC motherboard connector on each end - one end to the 1500SC mobo, one to the Power Distribution Board (Part 2F776).  I have 2 of these connectors, with the wires coming out of them, that I am going to solder together. I am hoping that the wires on each end correspond to the same pins on each end. (That would be logical, wouldn't it?)  I'm wondering if anyone can confirm this, that has such a cable in place, or has a manual of some such info.  Thanks for any and all help.

Answer : Problem: Making a 1G996 cable

Well, I finally just got the part from Dell, so no need to build one any more.