Microsoft
Software
Hardware
Network
Question : Problem: Connecting 3com switch to existing network
hi
i have a situation where i have to set up and configure 3com switch (4500 series, 50 port PoE).
i m connecting this switch in a room that has an existing network port(currently one avaya ip phone connected to it and a pc thru the ip phone).
I need this switch to be able to allow both voice and data. once i hook up this switch to the port
the data is working fine, but not voice.
so i need help configuring the ports on this switch.
the existing network structure is vlan 1= data and vlan 2=voice.
how should the individual ports be configured and how should the uplink port be configured.
thank you
Answer : Problem: Connecting 3com switch to existing network
usualy you have to set up a trunk between the 2 switchports of the 2 switches.
Only then your vlan traffic will go over the trunk. Than you can put individual ports a vlan
Random Solutions
Problem: How to configure a VPN Tunnel using Linksys WRV54G
Problem: How to Ghost an HP DL380 with RAID5
Problem: Matrox TripleHead2Go doesn't work after reboot
Problem: How can I use a cam corder with iPhone?
Problem: Citrix, MetaFrame XP, 1.0, Running on Windows 2000 Server SP4 with 3 GB of ram, Source: Save Dump Event ID: 1001
Problem: How to remove duplicate "Legacy Audio Drivers" and etc. ?
Problem: HOW DO I RECOVER ALL THE DATA ON THE ABOVE DRIVE,WHICH IS NOW RESPONDING "UNREADABLE"?
Problem: I'm in need of a backwards compatible PCI card.
Problem: Unable to Adjust background settings on Remote Desktop users connectin to 2003 Terminal Server
Problem: Toshiba Tecra 8200 Freezes when gently tilted.