|
|
|
Question : Problem: How do configure Raid 1+0 in Common Array Manager?
|
|
I am configuring a Storedge 6130 Array on Solaris 10. In the manual it mentions that when creating a Raid 1 volume with more than 2 disks the firmaware will automatically create a Raid 1+0 Configuration, yet in Common array manager it shows the virtual disk as Raid 1 and not Raid 1+0, Is the disk actually raid 1+0 or is there something else i need todo to verify that Raid 1+0 disks are been created
thanks for you assistance
|
Answer : Problem: How do configure Raid 1+0 in Common Array Manager?
|
|
It should do it automatically. You could use the sscs command to list the virtual disks. If the resulting disk volume
size is half of the total disks you added, but greater then one disk, then you have RAID 1+0.
|
|
|
|
