Question : Problem: Using Cisco 3560\3750 SFP port for Tape Library

I am going to be setting up a tape library. I am told with the library that I'm getting that there are two ways to set it up,

[svrs to be backed up]----->thru the lan---->[backup svr]--->SCSI--->[tape library]

or

[fiber nic]------>[fiber bridge]------>[tape library]

My question is, can I use a cisco switch (3560\3750) and plug the tape library in one of the spf ports on it?

I want to buy the switch to act as the 'fiber bridge' and since it's a gb switch and all the servers have gb nics, i just want them to have a gb connection to the tape library which itself is connected by fiber.

Also, in buying the switch, it says the SFP ports are empty, do I need to purchase a specific gbic or fiber module to plug into the spf port? And i'm assuming this module will depend what type of fiber connection is coming off the tape library, would that be correct? like SC to LC or someting another

Answer : Problem: Using Cisco 3560\3750 SFP port for Tape Library

One option, on the server at a command line run (assuming the registry hasn't been modified to change the default port for mstsc.exe):

netstat  -an  |Find  "3389"  |Find  /I  "established"

which will return the IP of the server and the connected users
Then with the IP of the connected user say 10.0.0.1 run

nbtstat  -A  10.0.0.1  |Find /I "MAC"

which will return the MAC address
If you had a bunch of these to do you could clean up the output of the first line and input into the second and make a simple batch file.