Question : Problem: I am looking for a compatible board with an ECS Elitegroup board model L4S5MG/651+

THe board has gone bad and i need one that will work in its place.  the processor is a pentium 4 2.4ghz, pc2700 ram, 120gb hard drive, xp home in a custom built machine.  i have attached a spec sheet that i foound about the board.  any questions please ask!!

Thanks
Sorry it is so long but i copied and pasted it here.........

Socket 478 board that supports Intel® Pentium® 4 processor up to 533MHz FSB

Integrated with the most advanced technologies:

Suspend to RAM
Internal/external AGP
USB 2.0 (SiS® 962L)
PROCESSORS

Socket 478 supports the Intel® Pentium® 4 processor
CHIPSET

SiS® 651 & SiS® 962L chipset
SiS® 651 host/memory controller with AGP 4X north bridget single chipset
Built-in high quality 3D accelerator
Integrated USB 2.0 host controller in SiS® 962L
SiS® 962L MuTIOL media I/O
LPC I/O - ITE IT8705F
System hardware monitor: Built-in ITE IT8705F
LAN: 10/100 Mbps faster Ethernet (optional)
AC97 audio codec: Compliant with AC97 2.2 specification
SYSTEM BIOS

Award 2Mb Flash EEPROM
Supports Plug and Play 1.0A, AMP 1.2, multi boot, DMI
Support for ACPI revision 1.0 specification
MEMORY

2 DDR DIMM sockets for 2.5V DDR333 SDRAM
Maximum: 2GB
I/O INTERFACE

Supports Plug and Play function
PS/2 keyboard and PS/2 mouse connectors
4 USB ports and LAN connector
1 EPP/ECP mode parallel port
1 16550 high-speed serial I/O ports
VGA connector
Audio ports (Line-in, Line-out, Mic-in, CD-in and game port)
4 PCI IDE interfaces - support four IDE devices (PIO mode 4, DMA mode 2, Ultra DMA 66/100/133)
Supports 360K~2.88M Byte, 3 mode FDDs or LS120
ATX power supply connectors
Ports, headers and others:
IrDA header (STR)
Front panel mic./line-out header
4 extra USB ports (USB2 and USB3)
HDD LED, Reset switch, Power switch headers
CPU, power and case fan headers
LAN card wake up / Modem ring wake up headers
RTC & BATTERY

SiS® 962L built-in 256 bytes of CMOS SRAM
With CMOS hardware clear jumper
EXPANSION SLOTS

3 PCI slots, 1 AGP slot, 1 CNR slot
FORM FACTOR

microATX (244mm*244mm), 4 Layers

Answer : Problem: I am looking for a compatible board with an ECS Elitegroup board model L4S5MG/651+

An eBay seller is offering an L4S5MG/651+ mobo that is advertised as NEW. Seller is in Australia. Item number is 150165582961 Auction ends October 6, 2007.