Question : Problem: Ghosted advanced server drive will not boot correctly

Ok here goes...
I ghosted a 2000 advanced server hard drive with active directory installed.
I used the -ntil -fro -fdsz switches in ghost.
I switched the drive I wanted to ghost to be the slave drive and the drive I wanted to ghost to the master
I started ghost and did the image from disk 2 to disk 1
The image worked fine.
However if I boot with only the new ghosted drive connected to the controller I get an error....
"Director services could not start because of the following error: the system cannot find the file specified"
The file specified is lsass.exe.
If I boot with both drives..... It boots fine.
The problem is, the reason I ghosted the drive was because the old drive had errors and I wanted to replace it. Now If I remove it I can't boot the server.
Any Ideas???

Answer : Problem: Ghosted advanced server drive will not boot correctly

Hi hawgpig,
Run a repair on your install from the W2KAS CD, that will fix your files. The file might be there but are corrupt because of the errors you are escaping from ....

Mattis