Question : Problem: Unknown Jumper Settings

I have a P54C motherboard and I'm trying to install a 233 MHZ CPU (was a 133).  I don't have the manual and don't know which jumpers to change.  The jumpers I do see are 3.3, 3.4 & 3.5 which I assume are voltages. My board name:
03/04/96 W83787F PnP-S; ID#: 03/04/96-i430FX-2A59CPDC-00.
Please let me know if I need a CPU with the Overdrive voltage regulator and which jumpers to change.  Thank you

Answer : Problem: Unknown Jumper Settings

Skylab, I am interested in this utilities too ............please send them to me - [email protected]

gigaman, if your board is P54C it does not support the dual-voltage required for P55C (Pentium MMX, 6x86L, 6x86MX, MII, K6, K6-2), so you can not install this CPU (233) on your board. Your options are:
1) Buy a WinChip 180 or 200 with will run perfect on your board (it is 3.3Volt or 3.52Volt - you have sayed that you have a 3.3/3.4/3.5 setting - the WinChip will run fine there)
2) If your board support 75MHz bus (200MHz CPU - 66bus, 180CPU - 60bus) you can buy a WinChip 225
3) If your board support 4x multiplier (133MHz CPU - 2x, 200CPU - 3x) you can buy a WinChip 240
4) You can buy a K6-2 overdrive - it will run on your board 100% - for 266/300/333 MHz K6-2 overdrives check this url: www.cpu-central.com/k6-2upgrade.html
don't buy a Pentium MMX overdrive - it run at only 200MHz and don't have the 3DNow! technology of K6-2