Microsoft
Software
Hardware
Network
Question : Problem: Making a drive restored with Ghost 14 bootable
Hey all,
&just purchased Ghost 14. I am finding my way around the new UIs, I am quite familiar with the older versions of Ghost.
Scenario:
* Installed G14 on C (OS WXP SP3 ) drive (120gb); created an image of the C drive along with the recovery CD. Image saved to another internal hard drive.
* Removed old C drive and installed new (250gb) unformatted drive
* Booted from the Recovery CD
* Ghost 14 found the image (recovery point).
* Initiated recovery process; image transferred; however, I was not presented with the option to make the drive bootable (where is that menu?).
* The image transferred to the new drive OK; but it is not bootable.
Thoughts as how to proceed? Thanks in advance!
Answer : Problem: Making a drive restored with Ghost 14 bootable
Does this post help at all?
http://norton.lithium.com/
norton/boa
rd/message
?
board.id=
other&thre
ad.id=4088
Random Solutions
Problem: Upgrade RAM, Video, and CPU for Intel D875PBZ
Problem: automatic proxy
Problem: I need to install a HP Officejet 7210 on a thin client. driver file to big
Problem: BIOS ROM Checksum error (MSI MS-7005)
Problem: PC Shuts Down Discriminately Among Different Task
Problem: hp 4240 prints pdf over and over
Problem: Computer doesnt turn on
Problem: Adding a non-HP second processor
Problem: Connect Wireless using vb.net
Problem: problem using ibm lto gen3 tape drive with backupexec 12