Microsoft
Software
Hardware
Network
Question : Problem: ArcServe 11.1 - CANWLIC.NLM states Host not initialized
Running CA ArcServe 11.1 SP3 on a NW 6.5 SP7 system, I've suddenly started receiving the following error messages loading ArcServe:
"CANWLIC.NLM: Host not initialized"
As a result, ASDB eventually unloads and ArcServe left not functional. :-(
System is running FC and connected to a SAN. No changes has been made to licensing, modules or their load order on the server.
Any ideas?
-- Klaus
Answer : Problem: ArcServe 11.1 - CANWLIC.NLM states Host not initialized
Hi,
the possible reason is that the tape library option is not installed correctly or the tape library connected on the SAN is not detected by the netware server.
Can you check if netware is detecting the tape library correctly.
bhanu
Random Solutions
Problem: Asa site to site domain problem
Problem: Timing/Counting Circuit
Problem: Shared Outlook Conference Room Calendar on LCD Kiosk
Problem: Change network card settings remotely
Problem: OWC Mercury Firewire Ext. drive not recognized by XP home
Problem: Different GBIC brands
Problem: ActiveSync 2 Devices at once
Problem: Problem adding RAM memory to PC
Problem: Ghosted (destination) Hard drive: Boots up OK - then restarts the PC!
Problem: Change WIA Defaults