Microsoft
Software
Hardware
Network
Question : Problem: QOS exceeded limited numbers of aggregate policers
HI experts,
I installed WS-6348 blade in my 6509 today making it a full switch. I put a config on the blade with the normal QOS settings per switchport and saw this error messasge on the logs:
%QM-4-AGG_POL_EXCEEDED: QoS Hardware Resources Exceeded : Out of Aggregate policers
I was able to get the blade to work by removing all QOS commands from each switchport on that blade. I really don't want to put QOS on the VLAN, but I may have to go that route. My question is, in the event of network congestion, how will devices plugged into this blade behave? Will it get priority because it is not participating in QOS or will it get thrown in the back of the line?
Answer : Problem: QOS exceeded limited numbers of aggregate policers
the QoS will be applied based on the service policy rules.
Random Solutions
Problem: What is the easiest way to combine files from two iTunes Music folder?
Problem: CRC errors and Spinrite
Problem: Installing two pci Modems with same model on the same pc , for Fax Server purpose .
Problem: SDLT 320 ejects all tapes
Problem: Network card route
Problem: USB Device Malfunctioned / Not Recognized - suppose motherboard damages
Problem: how do I use memtest without a diskette?
Problem: Need reliable simple backup software for WindowsXP with HP USB DAT72
Problem: HP Scanjet 6300C Drivers
Problem: Symantec BESR stuck at 5%