Question : Problem: Vpn setup going out via a pix 506


VPN connection fails with error 628

setup

inside lan ----  pix506---678 cisco router ------dsl

Other end

cable modem - netopia router.

Netopia end works fine if I connect from a dsl location without the firewal, and I can find the computers, print etc.

From the lan that goes out the pix 506 I get error 628 on the windows xp client.

I have vpn in enabled on the pix and am able to establish connection  into the lan, but not going out.

I am using pptp.

Is there anything that needs to be turned on on the pix ?

sdm

Answer : Problem: Vpn setup going out via a pix 506

You need to open some ports

This should walk you through the steps require:
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080143a5d.shtml
Random Solutions  
  •  Problem: Local Mapped Drives not available on Terminal Services
  •  Problem: How do I configure telnet and SSH access on a cisco pix 501?  Also, will I have to create a Access-list to allow telnet and SSH?
  •  Problem: Read about raid, is it worth the jump?
  •  Problem: How can I use two monitors on my desktop that has two adapters - NVIDIA GeForce and Intel on VGA Card.
  •  Problem: Dell PE2950 - No IP address showing on NIC Properties
  •  Problem: SBS 2003 Remote Web Workplace
  •  Problem: Acer Aspire hard drive crashed within 80 days.  Looking for a reliable replacement...
  •  Problem: Laptop and projector: No video on projector when playing video files.
  •  Problem: A user deleted their files from a network drive.  Backup is corrupt - how to get files back
  •  Problem: Blackberry Calandar does not synch wirelessly
  •  
    programming4us programming4us