Microsoft
Software
Hardware
Network
Question : Problem: Gigabit ethernet slow performance
Hello,
I'm trying to setup a NAS box and i'm experiecing slow performance. Here is my setup
Dell 2950 running debian etch attached to a 24port Gigabit HP Procurve Switch
PC Quad Core phenom with Ubuntu 8.04 attach to the same switch with on board pcie lan adapter (Realtek 8111/8168B)
I was using cat5e patch cords but change them to cat6 just in case.
Using iperf i get a throughput of 936-940Mbits/sec. This being very close or confirming the theoretical 1000Mbits/sec.
I've also tried Ixia testesting software giving me simular results.
When i do a file transfer, 700MB iso file, i get about 28-30 MB/sec. I say that this is a least half of what i was expecting. What is max MB/sec that someone could get? What should i check or change so i can have decent file transfers.
I measured the file transfer using ftp (2 programs) and rcp.
Thank you
Teo
Answer : Problem: Gigabit ethernet slow performance
Take a look at your HP switch ports - any errors? If so, check duplex.
Random Solutions
Problem: Best way to setup two Cisco Aironet 1100's
Problem: HP LaserJet 3380 only prints in Windows Vista, scanning does not work.
Problem: WTF's up with my iSCSI network config ???
Problem: unable to add new volume to existing RAID 5 array...Help
Problem: FastT Storage Firmware Upgrades
Problem: What are you suggestions for a new CAD workstation?
Problem: Laptop hard drive to Desktop.
Problem: Cisco Wireless Controller will not detect the Access Points
Problem: Need to identify fiber optic cable mode
Problem: Blackberry won't activate - Invalid PIN