Microsoft
Software
Hardware
Network
Question : Problem: Fan Connector Identification
I pulled a fan from a raid backplane that I want to replace because it produces too much noise. The connector is a mini 3 pin connector that none of my in-stock fans have. I'm trying to track down the name of this connector so that I can order a replacement fan with the appropriate connector.
I've attached a photo of the connector.
Answer : Problem: Fan Connector Identification
Does it look like this on the opposite side, if so it's called a Mini 3 pin connector
mini-3-pin.jpg
(8 KB)
(File Type Details)
mini 3 pin fan connector
Random Solutions
Problem: Which 22" TFT to buy?
Problem: Old Compaq computer NVidia Vanta on board vid card will not change resolution
Problem: Is it safe to use reformatted MFT corrupted harddisk?
Problem: Wiring Diagram for Winfast (760MG Series) K8S Mainboard
Problem: My USB device will function at reduced speed, how can I speed it up?
Problem: Need driver for Linksys Router
Problem: Get onto internet through another computer
Problem: how to reinstall nic in latitude d610
Problem: Smart-UPS 1400 no power
Problem: Needing instructions for disconnecting two small antenna like wires between the monitor and LCD monitor of Acer Aspire 3690